footer
bg frame
HOW TO
How To Remove Scratches ?Removing scratches from auto paint is a multi-step process that starts with leveling the paint surrounding the scratch and ends with restoring the shine. The number of steps depends on the severity of the scratch. This general guide to scratch removal will describe a typical scratch removal process. There are many techniques and tools available and you may find your own variation of this process that works for you.This guide describes how to remove random isolated deep scratches (RIDS). For overall swirl removal or fine scratch removal, you would use a polisher and a compound. That process is described in our Dual Action Polisher Guide and Rotary Polisher Guide. If you have isolated scratches that are too deep to remove without sanding, you"re on the right page.Important tips:1. This guide describes sanding by hand and then using a dual action polisher to compound and polish. This is one way of doing it. The best tool to remove sanding marks from an entire car is a rotary buffer with a wool pad, the appropriate compound and a little experience. Here, we"re working on isolated scratches.2. Factory baked-on paint is usually thin and hard, that"s two HUGE negatives working against you should you be in a position to want or need to sand on factory paint. Always do a Test Spot to a small section and make sure you can get 100% of your sanding marks out before sanding further.3. Always use the least aggressive approach to get the job done.4. Only sand enough to remove or improve the defects you"re trying to remove.5. Remember that sanding removes paint as does the compounding and polishing process, so take this into account as you work. 6. If possible, use a Paint Thickness Gauge to measure the film-build before sanding. Make a note of the reading you take for before, during and after. A Paint Thickness Gauge is a handy tool to give you an indication as to overall paint thickness as well as any bodywork or re-paint that has been done to spot areas or entire panels. 7. Don"t sand too close to edges or hard/sharp body lines. 8. Most important - Always work clean.
headerform search
bg
MANUFACTURES
MANUFACTURES
kotak abu2kotak abu2
SPOTLIGHT
SPOTLIGHT
Jasa Pembuatan Website By IKT